Problem Nokia Solution

In this tutorials I will show you the method of flashing Nokia mobiles by UFD Micro box which is also called HWK. First of all you have to install the setup of micro box. download it from http://www.smart-gsm.net/support

 

1) Open DCTxBB5 from desktop

2) Click the connect button

3) Select the model Of the Phone

4) After selecting the model of the mobile phone, you will have to connect the phone to the computer with its flashing cable or the USB cable. Now click the check button.

5) After selecting the model of the mobile phone, you will have to connect the phone to the computer with its flashing cable or the USB cable. Now click the check button.

6) If we get 1st boot err, then we should check three things:

1)  Cable may be faulty.

2)  Cable may not be properly connected

3)  Check the battery connector & program connector.

To flash the mobile we have to select the files required Description of The Files:

1)  MCU  File

6)  PM File 

.After giving all the required files, we click the ‘write flash’ button. It takes about 5 to 20 minutes to complete the flash process.When ‘flashing completed‘ message appears on the left side window, we have tick all the boxes below the UI options and click on the UI Settings button. After it is successfully done, the flashing is over. You can now remove the handset.

After selecting the model of the mobile phone, you will have to connect the phone to the computer with its flashing cable or the USB cable. Now click the check button. - See more at: http://www.allflashfiles.com/flash-nokia-mobile-ufs-micro-box/#sthash.0Wr197kl.dpuf

After selecting the model of the mobile phone, you will have to connect the phone to the computer with its flashing cable or the USB cable. Now click the check button. - See more at: http://www.allflashfiles.com/flash-nokia-mobile-ufs-micro-box/#sthash.0Wr197kl.dpuf

DCTxBB5

DCTxBB5

DCTxBB5